3
have completed the “Print Server Setup”. By clicking “Next”, your system will
perform “Add network port” of the print server to your PC.
12. Finally, the “Installation complete” window is displayed to indicate that the
Administrator Installation procedure is finished.
You have completed the administrator’s setup for most of the network environment. You
can then perform the “Client Installation” procedure on all client’s sides of the network.
On the other hand, if you want to print from this administrator’s PC to the print server,
all you need to do is to perform Windows' standard “add Printer” procedure as
described bellow/
1. Click Start , choose Setting, Printer
2. Double click Add New Printer, select local printer, click Next.
3. Select a suitable printer manufacturer and model, the click Next.
4. Choose the Print Server’s Network Port which was created by the administrator
installation process and click Next.
5. Complete the rest of the questions to finish the network printer setup.
Client Installation and Setup
Introduction
The Client Installation Program executes a wizard-driven procedure which performs the
following tasks:
1. Install client utilities and drivers in your PC
2. Automatically add all Network Ports to you PC
Note: Auto-detect/Auto-select network protocol.
The network port driver supports the network protocol auto-detection feature. It will
automatically select an available network protocol (IPX, NetBEUI or TCP/IP) of the
client computer to the print server.
Since both the print server’s side and client’s side support multi-protocols, the
configuration process of the client side is fully automatic.
After the installation, you can perform the standard “add Printer” procedure to use the
network printer.
Quick Installation and Setup
The Client Installation can be performed on Windows 95/98/Me/NT/2000 with the
same user interface. Before the installation procedure, please confirm that your PC has
been connected to the network and has at least on network protocol installed.
1. Insert the CD shipped along with the print server into your CD-ROM drive. The
Autorun.exe program should be executed automatically by Windows. If not run
Autorun.exe manually from the CD-ROM drive’s root directory.
2. The “Installation Manager” will be displayed on the screen.
3. Click “Client Installation” and the “Utilities Setup” window will be displayed.
4. Click “Next” and specify the destination folder where the utilities will be installed.
5. Click “Next” and specify the program folder where the program icons will be
added to.
