Instruction Manual
10
3. From the “Create new VD” screen that appears, click the “Select RAID Level” drop-
down to choose the appropriate RAID type
4. This will enable you to place a checkbox beside the disks that you would like to use
as part of the RAID set. Once you have selected, click “Next” to confirm
your selection.
5. You will now be presented with configuration options for your RAID set. Choose the
appropriate options and select “Submit” to confirm your changes. Your virtual disk
will then be visible in the left pane – the same properties can be accessed later by
selecting your virtual disk from the left pane.
