Instruction Manual
7
Installation Without a Floppy Drive
In the absence of an available floppy drive for driver installation,
once PEXESATA2I has been installed within the computer, install the
desired hard drive using an existing SATA controller, as provided by the
motherboard. Then:
Power on the computer, and boot from the operating system Boot
1.
CD, and follow Microsoft’s Windows installation procedure to
complete the operating system installation.
Once the operating system has been installed on the drive, install
2.
the
JMB36X_WinDrv_WHQL_R1.17.31WHQL\R1.17.31.00\Driver\
x32jraid_i.inf
driver file located on the included Driver CD.
From the Device Manager, verify that the RAID controller has
3.
successfully been installed. (For more information, please refer to
page 3:
Verifying Successful Installation
).
Once you have established that the driver installation was
4.
successful, power down the computer, connect the intended hard
disk to PEXESATA2I and power up the computer. The computer can
now be configured to boot from a drive connected to PEXESATA2I.
Содержание PEXESATA2I
Страница 1: ...SATA PCI Express Adapter PEXESATA2I ...
