7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
5.
Gently slide the
M.2 Connector
on the
Drive
into the
corresponding
M.2 Connector
on the
Adapter
and press
the
Drive
down toward the adapter until the
Drive
is in
place.
Note:
The
M.2 Connector
on the
Drive
is keyed so that it
only fits in the
Adapter
one way.
6.
Place the
Standoff
in the
Drive Installation Hole
that
matches the length of your drive.
7.
Replace the
Standoff Installation Screw
that you removed
in step 2 and tighten it in place.
8.
Insert the
Drive Mount Screw
through the
Drive Slot
and
into the
Standoff
. Use the
Phillips Head Screwdriver
to
tighten the
Drive Mount Screw,
securing the
Drive
in place.
9.
Repeat Steps 5 - 7 to install the second
Drive
into the
Adapter
.
Installing the Low-Profile Bracket
The
Adapter
can be mounted in both low-profile and full-
profile computer systems. By default, the full-profile bracket
comes pre-installed in the
Adapter
.
1.
Use a
Phillips Head Screwdriver
to remove the two
Bracket
Screws
from the
Adapter
.
2.
Remove the
Full-Profile Bracket
from the
Adapter
.
3.
Align the
Screw Holes
on the
Low-Profile Bracket
with the
Bracket Holes
on the back of the
Adapter
.
