Instruction Manual
5
5.
(Optional)
Connect an available SP4 power connection from your system power
supply to the card if additional power is required.
6. Place the cover back onto the computer case.
7. Connect the 4 Port breakout cable to the large connector on the card.
8.
(Optional)
If using the IDC header connections instead of some / all of the external
ports, connect them to the appropriate header(s), noting proper orientation of the
cable using the pinout provided above
NOTE:
Do not connect the matching internal and external port simultaneously. The
IDC headers are labeled S1 – S4 and correspond with the numbered ports on the
breakout cable.
9. Insert the power cable into the socket on the power supply and reconnect all other
peripherals removed in Step 1.
Driver Installation
1. Upon starting Windows, if the Found New Hardware wizard appears on the screen,
cancel/close the window and insert the included Driver CD into the computer’s CD/
DVD drive.
2. AutoPlay should automatically launch and display all of the folders on the CD. If not,
open the Computer (My Computer in Windows XP/Server 2003) and double-click on
the CD/DVD drive.
3. Navigate to
X:\IO\MOSCHIP\MCS99xx
(where X:\ is your CD/DVD drive letter) and
then choose the appropriate folder for the operating system you are installing on.
4. Where applicable, choose 32bit or 64bit depending on your operating system
5. Double-click the file
StnSetup.exe
application and the drivers will
automatically install.
