Instruction Manual
4
Jumper Settings
Hardware Installation
PCI312PUSB/LP, PEX312PUSB/LP & PUSBADAP/LP
This section details how to install PCI312PUSB/PEX312PUSB, in
conjunction with a daughter board, PUSBADAP:
Remove the computer cover. For more detailed instruction on how to
1.
perform this step, please refer to the documentation that was included
with your computer at the time of purchase.
Locate an empty PCI/PCI Express slot and remove the metal bracket
2.
covering the accompanying empty port/socket.
Connect one end of the
3.
9-pin Header Cable
(provided by
PUSBAD/LP) to the expansion port (depicted on pg. 2 as
J4:USB
Ports 4, 5
).
Position the card above the open PCI/PCI Express slot, ensuring that
4.
the card is properly aligned with the slot. Insert the card firmly into the
slot, distributing force evenly across the length of the board, then fasten
the metal bracket to the computer case (using the screw removed in
step #2).
JP2 (24V Selector)
Settings
Default:
The power source of the 24V-keyed Pow-
eredUSB connector is supplied from the internal
step-up switching regulator (jumpers must be set
identically, both at
INT
or
EXT.
The power source of the 24V-keyed Powered USB
connector is supplied from the external Power DIN
input connector, in this case, a 24V AC adapter will
be required. Please see http://www.startech.com
for more information.
