Instruction Manual
2
Hardware Installation
1. Turn your computer off and any peripherals connected to the computer (ie. Printers, external
hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of
the computer.
2. Remove the cover from the computer case.
3. Locate an open PCI slot and remove the metal cover plate on the rear of the computer case.
4. Insert the card into the open PCI slot and screw the bracket to the rear of the case.
NOTE:
If the computer takes full profile expansion cards, the low profile bracket on the card
will need to be changed with the included full profile bracket.
5. Place the cover back onto the computer.
6. Insert the power cable into the socket on the power supply and reconnect your other
peripherals.
Driver Installation
Windows
®
2000/XP/Server 2003/Vista/7
1. After installing the card in the PC, power up the PC. You will be presented with the Found
New Hardware prompt. Cancel this prompt.
2. Place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click
Run. Type “D:\SOUND\VT1723\setup.exe”. (Assuming you have placed the CD in CD-ROM
drive D:).
3. Follow any on-screen instructions to complete the software installation.
4. Restart your system.
5. Once you have rebooted the computer, the PCISOUND5LP sound card will be ready to use.
