Instruction Manual
4
Port 4
Pin
Normal
12V
5V
1
1
J13
J13
1
J20
12V
5V
J13
1
J20
12V
5V
4
1
J14
J14
1
J20
12V
5V
J14
1
J20
12V
5V
8
1
J15
J15
1
J20
12V
5V
J15
1
J20
12V
5V
9
1
J16
J16
1
J20
12V
5V
J16
1
J20
12V
5V
Hardware Installation
1. Turn your computer off and any peripherals connected to the computer (i.e. Printers,
external hard drives, etc.). Unplug the power cable from the rear of the power
supply on the back of the computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. Refer to documentation for your
computer system for details.
3. Locate an open PCI or PCI-X slot and remove the metal cover plate on the rear of the
computer case.
4. Gently insert the card into the open PCI or PCI-X slot and fasten the card’s bracket to
the rear of the case.
NOTE:
If installing the card into a small form factor/low profile system, replacing the
pre-installed full profile bracket with the included low profile installation bracket may
be necessary.
5.
OPTIONAL:
If using power over serial, connect an LP4 Molex power connector from
the computer power supply to the LP4 Molex connector on the card.
6. Place the cover back onto the computer case.
7. Connect the 4 Port breakout cable to the large connector on the card.
8. Insert the power cable into the socket on the power supply and reconnect all other
connectors removed in Step 1.
