Windows NT 4.0
- Upon booting up for the first time following the physical installation of
the PCI Parallel card, Windows will detect that the card is present and prompt for driver
installation. Insert the driver CD in your CD/DVD-ROM drive, and direct Windows to
search for the correct driver in the following path:
D:\IO\PCI IP\WHQL Driver for
2K_XP_2003
, where D:/ specifies the CD/DVD-ROM drive letter designation.
Linux
- Detailed instructions for Linux installations are located on the accompanying
Driver CD, in the following locations:
D:\IO\PCI IO\Linux\Red Hat V8.0.pdf
D:\IO\PCI IO\Linux\Red Hat V6.0.pdf
DOS -
To install the necessary drivers from within DOS, please locate and execute the
following file:
D:\IO\PCI IO\DOS\install.exe
Verifying PCI Parallel Card installation
Once the software installation has completed, verify that the hardware has successfully
been installed on your system:
1. Open
Control Panel
.
2. Open
System
.
3. Open
Hardware
.
4. Open
Device Manager
.
5. Click on
Ports
, to display the newly installed port, as shown below. If the port does not
appear, you may be required to re-install the driver software.
Instruction Manual
3
Newly installed ports
