18
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4.
Using an
8 mm
Wrench
or
Pliers
(not included), hold the
Nut
and tighten the
M5 x 10 mm
Screw
using the
Phillips
Head Screwdriver
, being careful not to over-tighten.
5.
To install the second
M5 x 10 mm Screw
,
repeat steps 2 - 4.
6.
(Optional) Remove the adhesive backing on the
EVA Form
Strips
and attach them to the inside of the
Adjustable
Clamp
, on the M
edia Device Mounting Assembly
, to
protect and secure the
Media Device
in place.
7.
Insert a
Media Device
into the
Media Device Mounting
Assembly
.
8.
Using the two
Thumb Screws
on the bottom of the
Media
Device Mounting Assembly
, adjust the thickness, Min. 47
mm (1.8”) - Max. 76 mm (2.9”), to accommodate the size of
the
Media Device
and secure it in place.
9.
Wrap the
Elastic Band
around one of the
Hooks
on the side
of the
Media Device Mounting Assembly
.
10.
Pull the
Elastic Band
over-top of the
Media Device
and
connect the other end to the opposite
Hook
on the
Media
Device Mounting Assembly
.
Note:
Depending on the size of the
Media Device
you
are trying to mount, the
Elastic Band
may not be able to
properly secure the
Media Device
in place. If this occurs, try
using the
Reusable Tie Straps
to secure the
Media Device
in place.
