15
7.
Tighten the
M-Type Screws
with the
Phillips Head
Screwdriver
, until each
Screw
is flush with the surface of the
Display Mounting Bracket Assemblies
.
Warning!
Do not over-tighten the
M-Type Screws
. If you
encounter any unexpected resistance as you are fastening
these
Screws
, immediately stop and attempt to use a
different length of
M-Type Screw
.
Hang the TV on the Wall Plate
1.
Loosen the 2
Screws
, located at the bottom of the
Display
Mounting Bracket Assemblies
, with the
Phillips Head
Screwdriver
. (Figure 5)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 5
Phillips Head
Screwdriver
TV
Screw
