11
2.
Route the
Power
and
Video Cables
behind the
Plates
on
the
TV Wall-Mount Assembly
arms.
Note:
It may be necessary to remove the
Plates
from the
TV Wall-Mount Assembly
. To remove these
Plates
: use a
Phillips Head Screwdriver
to remove the four
Phillips Head
Screws
. After relocating your
Cables
, replace the
Plates
and
replace and tighten the four
Phillips Head Screws.
3.
Plug the
Power
and
Video Cables
into your
TV
.
4.
(Optional) Route the other end of your
Cables
behind your
Mounting Surface
.
Note:
Consult a professional in order to complete this
portion of the installation. Special tools, installation
procedures, and even specialized cables are required for in
wall cable management.
Operation
Adjust the TV
Caution!
Ensure that your fingers are clear from all moving
parts and pinch points while adjusting your
TV
. (Figure 9)
Figure 9
