Instruction Manual
2
IIn
ns
stta
alllla
attiio
on
n a
an
nd
d u
us
sa
ag
ge
e
1. Insert the ExpressCard into an available ExpressCard / 54 or 34mm slot. Since this
card is hot-pluggable, this can be performed while the computer is on or off. Once
the card has been inserted, ensure the computer is powered, to proceed with
installation.
2. Windows will detect that the card has been inserted, and will prompt for driver
installation. To install the necessary software, follow the on-screen instructions. Once
the driver has been installed, the operating system will notify you that your new
hardware is ready for use.
Connecting FireWire and USB devices to the ExpressCard
To begin using your FireWire and USB peripherals with EC1U2F, simply insert the
FireWire or USB connector provided by the peripheral or attached cable as appropriate
into one of the ports provided by the ExpressCard.
Once USB and/or FireWire devices are connected to the ExpressCard, Windows will
request the required drivers for each device respectively. For further information
regarding the attached peripheral drivers, please consult the documentation that
accompanied the purchase of the peripheral device(s).
Please note:
For peripherals requiring lower voltages, EC1U2F offers built-in power
capability. If more power is required, an external 5VDC power adapter (not included with
EC1U2F) can be connected to the power port on the ExpressCard.