Instruction Manual
2
Installation
1. Insert the FireWire IEEE 1394 Express Card into an open Express
Card slot in the notebook.
2. The Found New Hardware Wizard will automatically detect and install
drivers for the FireWire IEEE 1394 Express Card. Once the wizard has
completed the installation of the drivers, the device is ready for use.
Troubleshooting
To verify that the FireWire IEEE 1394 Express Card was installed
correctly, open the Device Manager by navigating to: My Computer->
Control Panel->System->Device Manager. The EC13941A1B will appear
under IEEE 1394 Bus Host Controller.
If the EC13941A1B is not functioning, ensure that none of the ports
on the device are conflicting with any ports present elsewhere on the
computer. Also, check to ensure that the physical connection between the
PCI-E port and the EC13941A1B is snug and secure.
