Instruction Manual
17
Scan Type
Ready PC +
N
: In Scan mode, scan through power-on and eye mark selected computers.
Ready PC: In Scan mode, scan through power-on computers. The non-volatile memory
stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. Scan Rate settings are stored in non-
volatile memory.
Keyboard Speed
The Console offers keyboard typematic settings that override similar settings in the
BIOS and in Windows. Available speed options are Low, Middle, Fast and Faster as
10, 15, 20 and 30 characters/sec respectively. The non-volatile memory stores the
Keyboard Speed setting.
Hotkey Menu
When you hit the left <CTRL> key twice within two seconds, the Hotkey Menu appears
displaying a list of hot-key commands if the option is On. The Hotkey Menu can be
turned Off if you prefer not to see it when the left <CTRL> key is hit twice. The non-
volatile memory stores the Hotkey Menu setting.
CH Display
Auto Off: After you select a computer, the port number and name of the computer will
appear on the screen for 3 seconds then disappear automatically. When set to Always
On: The port number and name of a selected computer and/or OSD status are displayed
on the screen all the time. The non-volatile memory stores the CH Display setting.
Position
The position of the selected computer name and/or OSD status displayed on screen
during operation. The actual display position shifts due to different VGA resolution, the
higher the resolution the higher the display position. The nonvolatile memory stores
the Position setting. UL as Upper Left, UR as Upper Right, LL as Lower Left, LR as Lower
Right. MI as Middle.
