Instruction Manual
DE:
Bedienungsanleitung - de.startech.com
FR:
Guide de l'utilisateur - fr.startech.com
ES:
Guía del usuario - es.startech.com
IT:
Guida per l'uso - it.startech.com
NL:
Gebruiksaanwijzing - nl.startech.com
PT:
Guia do usuário - pt.startech.com
Manual Revision: 05/25/2012
For the most up-to-date information, please visit: www.startech.com
DP2HDMIUSBA
DisplayPort® to HDMI® Adapter with USB Audio
Packaging Contents
• 1 x DisplayPort® to HDMI® adapter
System Requirements
• Multi-mode DisplayPort® (DP++) enabled computer system with
available DisplayPort® port
• USB enabled computer system with available port
• HDMI® enabled display device
Installation
1. Make sure the computer system and display device are turned off.
2. Connect the DisplayPort® connector into the host computer
system’s video card.
3. Connect the USB connector on the adapter into an available USB
port on the host computer system.
4. Connect a standard male/male HDMI® cable (not included) from
the adapter to an available HDMI® connector on the display device.
5. Power on the display device.
6. Power on the computer system. The Power LED on the adapter
should light up.
7. The computer system should automatically detect the display
device. Driver installation or special setup requirements depend
on the connected display device. Consult any documentation
included with your display device.
8. The operating system should also automatically detect and install
a new audio output device.
9. If you wish to send audio over HDMI®, check the audio properties
for the operating system, to make sure the USB adapter is set as
the default audio device.
NOTE:
This will disable audio output from any speakers/
headphones currently connected to the computer system.
10.If you do not wish to use audio over HDMI®, set the default audio
device back to the original audio output device (e.g. sound card)
for your system.
*actual product may vary from photos
Specifications
Bus Interface
DisplayPort 1.1a
USB 2.0
Video Signal
High Speed HDMI (1.3b)
Connectors
1 x DisplayPort male
1 x HDMI female
1 x USB type A male
LEDs
1 x Power
Integrated Cable Length
61cm / 2ft
Maximum Video Resolution
1920x1200 / 1080p
Audio Support
Yes - 2 channel LPCM
HDCP Support
Yes
Operating Temperature
0°C ~ 70°C (32°F ~ 158°F)
Storage Temperature
-10°C ~ 80°C (14°F ~ 176°F)
Humidity
10% ~ 85% RH
Dimensions
80mm x 56mm x 12mm
Weight
103g
DisplayPort® connector
(Input)
USB connector
HDMI® connector
(Output)
Power LED
