Instruction Manual
4
2. Manually Place the ST124DP in and out of Standby mode
a)
To manually place the ST124DP into standby mode, and turn off all attached
display devices.
Press and hold the standby/function button for 5 seconds. The
Blue LED will turn off indicating the standby process has begun. In this state the LED
will flash every 5 seconds.
b)
To manually bring the ST124DP out of standby mode, and turn off all attached
display devices.
Press and hold the standby/function button for 5 seconds. The
Blue flashing LED will turn solid and the display devices will turn back on.
3. Remote Control Operation
a)
Turn ON/OFF Monitor
Press the button number on the remote that corresponds
with the display you wish to power on/off and then press VIDEO.
b)
Disable Audio
Press the button number on the remote that corresponds with
audio destination you wish to disable and then press Audio.
4. EDID Monitor Emulation
EDID allows the video source to output the most ideal signal to the video display.
The “EDID Copy” function on the ST124DP ensures that EDID is still active through
the switch. This function allows the system either to read the necessary EDID
information from the display or to copy EDID from an individual display device
attached to the switch.
NOTE:
Before starting, slide the Switch to the desired position.
