StarTech.com ATXSILENT, Инструкция по эксплуатации

Страница: 5 / 10

3
System Requirements
This case does NOT come with a motherboard, power supply, hard or floppy disk
drives, sound cards, I/O cards or any other computer component not listed above. You
will need to supply these components yourself.
NOTE:
When purchasing a motherboard for this case, make sure that the motherboard
uses the same external/internal connections as the ATXSILENT. If your motherboard
does not match the case, you may not be able to use some of the front ports.
Installing Your Components
Install your internal components according to their manufacturer’s instructions. The
ATXSILENT can support full-sized dual-processor ATX motherboards and ATX power
supplies. The following are installation hints and suggestions that you might find useful.
Motherboards:
The clamshell contains motherboard standoffs, screws, and buffers (red
circles). Be sure to place the buffers between the motherboard and the screws. Remember
to follow the manufacturer’s instructions and ensure that all your components are
properly connected.
Power Supplies: The ATXSILENT supports ATX power supplies. To complement the
ATXSILENT, StarTech.com recommends using a silent power supply, like the
StarTech.com ATXPOW350SL. To further dampen the noise of your power supply, you
can use some of the pads in the clamshell.
Peel the paper off the back of the power supply anti-vibration pad and stick the pad to
your power supply. Make sure you stick the pad to the side of the power supply that will
be facing the rear of the case. You can also stick the two rectangular anti-vibration pads
on the underside of the power supply to prevent vibration against the “lip” of the case.
The pads will act as a buffer between the power supply and the case, preventing
vibration.
Place the pad
on your power
supply, making
sure that the
fan is not
blocked.