Instruction manual
8
7. Run the monitor cable through the cable-management hook on the bottom of the
mounting plate
. (
figure 5
)
figure 5
Adjust the angle of the monitor
To position the monitor, do either of the following:
• Use the
5 mm hex key
to loosen the screw in the monitor mount. Move the monitor
and then tighten the screw again. (
figure 6
)
• Use the
4 mm hex key
to adjust the two swivel joints in the
display arm
. (
figure 6
)
figure 6
5 mm hex key
4 mm hex key
Cable-management hook
