Instruction manual
9
4. Remove the backing from the two
rubber pads
(
7
) and affix the
rubber pads
to the
tops of two of the
clamp screws
on the underside of the
L bracket
and
spring arm
.
(
figure 2
)
figure 2
Rubber pads
Clamp screw
Spring arm
L bracket
5. Depending on the thickness of your mounting surface, do one of the following:
• If your mounting surface is between 10 and 55 mm (0.4 and 2.2 in.) thick,
position the
desk clamp
(
8
) so that the holes on the
desk clamp
line up with
the top two holes in the
L bracket
. Insert two of the
clamp screws
through
the
L bracket
and into the
desk clamp
. Use the
4 mm hex key
to tighten the
clamp screws
. (
figure 3
)
• If your mounting surface is between 50 and 85 mm (1.9 and 3.3 in.) thick,
position the
desk clamp
(
8
) so that the holes on the
desk clamp
line up with
the bottom two holes in the
L bracket
. Insert two of the
clamp screws
through
the
L bracket
and into the
desk clamp
. Use the
4 mm hex key
to tighten the
clamp screws
. (
figure 4
)
