StarTech.com 8STUNI251BMU33 Скачать руководство пользователя страница 2

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device must 

accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by StarTech.com could void the user’s 

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003. 

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other 

protected names and/or symbols of third-party companies not related in any way to  

StarTech.com.  Where they occur these references are for illustrative purposes only and do not 

represent an endorsement of a product or service by StarTech.com, or an endorsement of the 

product(s) to which this manual applies by the third-party company in question.  Regardless 

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby 

acknowledges that all trademarks, registered trademarks, service marks, and other protected 

names and/or symbols contained in this manual and related documents are the property of 

their respective holders.

Содержание 8STUNI251BMU33















Отзывы: