Instruction Manual
88
Clearing/Refreshing MLD Snooping Statics
1.
On the
MLD Snooping Statistics
page, the following information will be
displayed:
•
Total Rx:
Displays the current total Rx.
•
Valid Rx:
Displays the current valid Rx.
•
Invalid Rx:
Displays the current invalid Rx.
•
Other Rx:
Displays the current other Rx.
•
Leave Rx:
Displays the current leave Rx.
•
Report Rx:
Displays the current report Rx.
•
General Query Rx:
Displays the current general query Rx.
•
Special Group Query Rx:
Displays the current special group query Rx.
•
Special Group & Source Query Rx:
Displays the current special group &
source query Rx.
•
Leave Tx:
Displays the current leave Tx.
•
Report Tx:
Displays the current report Tx.
•
General Query Tx:
Displays the current general query Tx.
•
Special Group Query Tx:
Displays the current special group query Tx.
•
Special Group & Source Query Tx:
Displays the current special group &
source query Tx.
2.
Click on the
Clear
button to clear the statistics data displayed.
or
3.
Click on the
Refresh
button to refresh the statistics.
Multicast Throttling Settings
Multicast throttling sets a maximum number of multicast groups that a port
can join at the same time. When the maximum number of groups is reached on
a port, the switch can take one of two actions; either “deny” or “replace”. If the
action is set to deny, any new multicast join reports will be dropped. If the action
is set to replace, the switch randomly removes an existing group and replaces it
with the new multicast group.
Once you have configured multicast profiles, you can assign them to interfaces
on the Managed Switch. Also you can set the multicast throttling number to limit
the number of multicast groups an interface can join at the same time.
