Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com
could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two years warranty.
For further information on product warranty terms and conditions, please refer to
www.startech.com/warranty
.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits,
loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,
the limitations or exclusions contained in this statement may not apply to you.
Safety Measures
• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.
Mesures de sécurité
• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser
ce produit.
安全対策
• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。
Misure di sicurezza
• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare
questo prodotto.
Säkerhetsåtgärder
• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
10. Reconnect the
Power Cable
to the back of the
Host Computer
.
11. Reconnect all of the
Peripheral Devices
disconnected in
Step 1
.
Install PCIe Cards in the PCIe Expansion Chassis
Sharp edges!
Be mindful of the sharp edges around the PCIe Expansion Chassis when
the Metal Cover is removed.
1. Turn
Off
the
PCIe
Expansion Chassis
and unplug all cable connections.
2. Release the
Metal Cover
by removing the
Screws
(x 12) using a
Phillips Head
Screwdriver
. The
Screws
are located on top and the opposite side of the connectors
on the
PCIe Expansion Chassis
.
3. (Optional) The
JP2
and
JP1
Jumper
settings on the board allow you to choose
different power settings. (Figure 1)
Jumper
Function
1
JP1 Jumper
(PWR IN)
•
EXT
(default)
receives power from the
DC Power Port
or
Terminal Block Connector
•
VBUS
receives power from the
PCIe Host Adapter Card
• It must be used in Combination with
JP2
(PWR CTL)
set to
HOST
2
JP2 Jumper
(PWR CTL)
•
HOST
the
PCIe Host Adapter Card
provides power
•
JP1
(BUS PWR) on the
PCIe Host Adapter Card
must be
on the
12V
or
5V Position
•
ON
(default) the
PCIe Expansion Chassis
provides power from
the
DC Power Port
or
Terminal Block Connector
3
JP3 (CLKREQ)
• Keep it on the default
Enabled
(ENA) position at all times
4. Locate an available
PCIe Slot
on the
Expansion Chassis
, using a
Phillips Head
Screwdriver
remove the corresponding
Slot Cover Plate
from the
PCIe Expansion
Chassis
.
5. Gently insert the
PCIe Card
(s)
into the
PCIe Slot
and fasten the
Bracket
to the
PCIe
Expansion Chassis
.
The
PCIe Expansion Chassis
supports
PCIe Cards
x1
only.
6. Install the
Metal Cover
back onto the
PCIe
Expansion Chassis
.
7.
Screw-Lock
the
USB Type-C Cable
onto the
PCIe Expansion Chassis
and the
PCIe Host Adapter Card
on the
Host Computer
. This
ensures the correct cable
orientation.
8. Connect the
Power Adapter
or use the optional
Terminal Block Connector
to
supply power. Turn
On
the
Expansion Chassis
by flipping the
On/Off Switch
.
9. Turn
On
the
Host Computer
.
Note:
No drivers are needed for the PCIe Expansion Chassis. Some PCIe Cards may
need drivers to finish their installation.
(Optional) Install the Mounting Brackets
1. Use
the
Mounting Screws
(x 2)
and
Phillips Head Screwdriver
to fasten the
Front
Mounting Bracket
on the
PCIe Expansion Chassis
.
2. Repeat
Step 1
to install the
Rear Mounting Bracket
.
Figure 1
