background image

4

7. Put your case’s cover back on and power on your computer. 

8. Your computer will display a message saying new hardware has been found. 

Windows 98SE and 2000 users

Follow the onscreen prompts and direct Windows to 

the appropriate folder on the driver disk. Windows will install the necessary drivers. 
Follow any on-screen prompts to complete the installation.

Using Your Card Reader

The LEDs on the card reader are your best indication of the reader’s activity.

• The solid Power LED indicates that the card reader is powered.

•  A flashing Access LED indicates that there is data being transferred to or from the 

card.

Inserting a Card

1. Turn on your computer.

2. Insert your memory card into the proper slot on the card reader.

3. Mac users: A new icon will appear on your desktop.

Windows

users: A new icon will appear in “My Computer.”

4. The card can now be accessed as an extra disk.

Removing a Card

1. Make sure that none of the LEDs on the front of the card reader are flashing. If you 

remove the card when the LEDs are flashing, data may be lost from your card.

2. Mac users should drag the memory card icon to the Trash bin. 

Windows

users should right-click on the drive icon and choose to eject the card.

3. Physically remove the card from the reader.

Using the Reader With the Bracket

To insert the reader into the bracket, slide the reader into the bracket until it clicks into
place. Press the button on the front of the bracket to release the ejectable card reader.

Содержание 35FCREADREM












Отзывы: