13
E
N
13
9201-100191
6 Troubleshooting
Trouble
Possible causes
Remedy
Motor overheats
•
Incorrect power cables
•
Winch running time was too long
•
Use only supplied or similar power
cables
•
Let winch cool down several minutes.
Motor does not turn on
1.
Remote battery is dead.
2.
Vechile battery needs charging
3.
Loose battery cable connections.
4.
Solenoid malfunction
5.
Remote control damaged
6.
Defective motor
7.
Water has entered to motor
8.
Internal damage or wear
1.
Replace remote battery
2.
Fully charge battery
3.
Tighten nuts on all cable connections
4.
Tap solenoid to loosen contacts
5.
Replace remote
6.
Check for voltage at armature port
7.
Allow to drain and dry
8.
Take the unit to the qualified repair shop
Motor runs but wire rope drum does not turn.
•
Clutch is not engaged
•
Move the clutch handle to the engaged
position. If that does not work, ask a
qualified technician to check and repair.
Motor runs slowly or the power is poor.
•
The vehicle battery is running out
•
Insufficient current or voltage
•
Recharge the vehicle battery by running
vehicle engine.
•
Clean, tighten or replace the connector
Motor runs in only one direction or keeps buz-
zing noise.
•
Defective or stuck solenoid
•
Defective switch assy
•
Tap solenoid lightly to free stucked con-
tacts. Repair or replace solenoid.
•
Replace switch assy
7 Environment
Deliver the broken device to the appropriate electronic waste collection point. Devices cardboard
packaging can be disposed by recycling cardboard waste or by burning.