5
Magnum Kiuas – Operating and installation instructions
25.05.2019
Starsauna Oy
Technical Support:
Pistotie 4
+358405455625 (from 8-16)
15860 Hollola, Finland
1.2 – MENU STRUCTURE – FINLANDIA CONTROL CENTER
Default status (temperature display)
Target temperature
Heating time
Timer
The adjustment menus of the device are shown in the image above. The user can move from one menu to
another using the Menu button. When the sauna stove is on, the (
˄
) and (
˅
) buttons can be used to adjust the
settings, as shown in the image above. The dot in the lower right corner will be on when the resistors warm
up (indicated with an arrow).
2.
USING THE SAUNA STOVE
2.1 – ADJUSTABLE SETTINGS
Parameter
Adjustment
range
Adjustment
increment
Default value
Please note!
Target temperature
adjustment
40-110°C
1°C
60°C
Heating time
1 h - 6 h
0.5 h
1 h
See Section 2.3
Timer
0.5 – 24 h
0.5 h
0 h
Not in use
2.2 – TARGET TEMPERATURE
The sauna’s target temperature may be adjusted in increments of one Celsius. The minimum temperature is 40 degrees
and the maximum temperature is 110 degrees. This setting is saved.
The target temperature can be adjusted in two different ways.
1.
Pressing the Menu button shows the target temperature on the screen.
You can use the +/˄ and –/˅ buttons to change the value. If you do not press any buttons, the
controller will stop displaying the target temperature menu automatically in approx. 10 seconds. You
can also exit the menu by pressing the Menu button repeatedly.
2.
When the sauna temperature is on the display, pressing the (+/˄) or (–/˅) button causes the controller
to move directly to the target temperature settings. Exiting the menu happens as described in section 1.
