-17-
Go to Reference
: Drive Motor to zero point.
Go to X.X
: Drive Motor according to the
USALS Setup
.
4.3.3 Search Type
A
：
Satellites Search
1. Press the
OK
key to enter the satellite list
；
then press the
CH+/CH-(UP/Down)
key select the satellite and press
the
OK
button.
2. Complete the antenna setting
of this satellite.
3. Choose
Sat Search
in
Search
Type
menu then press the
OK
button, you can start Satellite
search.
B:Manual TP Search
1. Press the
OK
key to enter the satellite list
；
then press the
CH+/CH-(UP/Down)
key select the satellite and press the
OK
button.
2. Complete the antenna setting of this satellite.
3. Highlight the
Transponder
and press the
VOL-/VOL+(Previous/Next)
choose the transponder which you want search
4. Choose
TP Search
in
Search Type
menu then press the
OK
button, you can
start TP search.
C: blind search
1. Choose one satellite or add a new satellite and press the
OK
button.
2. Choose
Blind Search
in Search Type menu then press the
OK
key, you can
start blind search.
3. After searching, it will save all the transponders automatically.
