Starrett MVR200 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 26

Starrett MVR200 Скачать руководство пользователя страница 4

- 4 -

1.4

Regulatory Compliance

The MVR200 and MVR300 Video Metrology Systems have been inspected, tested, and
evaluated by independent test laboratories and are declared to comply with Council Directives
2006/42/EC - Machinery and 2002/95/EC RoHS (by exemption) when installed and operated in
accordance with this manual. Accordingly, these systems are entitled to bear the CE Mark. The
Product Safety, EMC Testing and Evaluation reports can be provided upon request.

EMC Test Standards

EN 61326-1:2013
CISPR 11:2003+A1:2004 +A2:2006

Radiated and Conducted Emissions

IEC 61000-4-2:2009

Electrostatic Discharge Immunity

IEC 61000-4-5:2006

Power Line Surge Immunity

IEC 61000-4-4:2012

Electrical Fast Transients Burst Immunity

EN 61000-4-6:2009

RF Common Mode Immunity

IEC 61000-4-3:2006 +A2:2010

Radio Frequency Immunity

IEC 61000-4-8:2010

Power Frequency Magnetic Field Immunity

IEC 61000-4-11:2004

Voltage Dips and Short Interruptions Immunity

Safety Standards

EN 60204-1:2006+A1:2009

Safety of Machinery, Electrical Equipment of Machines

EN 12100

Safety of Machinery, Principles for Risk Assessment

1.5

Disclaimer of Liabilities

The L.S. Starrett Company shall have no liability or responsibility to the customer or any other
person or entity with respect to any liability, loss or damage caused or alleged to be caused
directly or indirectly by this documentation, or the hardware and software described in it. This
includes, but is not limited to, any interruption of service, loss of business or anticipatory profits,
or consequential damages resulting from the use or operation of hardware or equipment.

1.6

Copyright & Trademark Information

MVR200

™ and MVR300™ are trademarks of the L.S. Starrett Company. M3™ is a trademark of

MetLogix, Inc. Windows

®

is a registered trademark of Microsoft Corporation.

«
...
2
3
4
5
6
...
»

Содержание MVR200



























Отзывы:

Нет отзывов