Starmobile diamond d1, Быстрое руководство

Страница: 9 / 22

3
1.2 Battery
Note: Your Starmobile phone needs to be fully charged for first time use.
1.2.1 Installing and Removing the Battery
• To install the battery:
Align the metal connectors of the battery with the battery
terminals. Push the battery in until it locks into the slot and
put the battery cover back in place.
• To remove the battery:
Lift the battery cover. Raise the bottom of the battery to
remove it from the battery slot.
1.2.2 Charging the Battery
• Plug one end of the charger into the USB/charging port then
plug the other end into a standard AC power outlet.
• Once connected, the battery icon will flash repeatedly on the
screen. When the battery level icon has stopped flashing, this
means that the battery is fully charged. It is normal for the
mobile phone and charger to become warm during charging.
• When charging is complete, disconnect the charger from both
the electrical outlet and the mobile phone.
ATTENTION:
• Charging must be performed in a well-ventilated area with a
temperature between -10°C and +45°C.
• Use only the supplied battery and charger. Using accessories of
other manufacturers or vendors may invalidate any approval or
warranty applicable to the device. It may result in non-operation of
the mobile phone or loss of information.
• If the mobile phone automatically shuts down or indicates that
“Battery is low”, it is advisable to charge your battery. If the battery
has not been entirely used up before recharging, the charging time
will automatically decrease.
D
1