STARLINK Volcano mount Скачать руководство пользователя страница 6

Страница: 6 / 8

Install Instructions

Never set the Starlink directly onto roof. Directly place the Starlink into mount and remove carrying bag.

8. Place the Starlink and cable
into the carrying bag and carry to
the install location. Do not set
the Starlink directly onto roof.

9. Place the mast of the Starlink
into the hole at the center of the
mount. Mount Starlink within 40°

of vertical.

10. Unravel your connected cable
coil. Route the loose end into your
home and connect to the power
supply.

11. Use wall clips to fasten the
cable to the wall along your route.
Avoid puncturing cable and sharp
bends, and follow horizontal/
vertical lines.

INSTALLATION

Содержание Volcano mount

Страница 1: ...Starlink Volcano Mount ...

Страница 3: ...Box Contents Additional Items Needed Volcano Mount Lag Bolts 6x Carrying Bag Wall Clips Sealing Tape Strips Sealing Tape Squares 1 2 in Socket Wrench 5 32 in Drill Bit Stud Finder Drill SETUP ...

Страница 4: ...Find A Spot Clear view 100 degrees of the northern sky over the perimeter of rooftop Choose A Route Avoid placing the Starlink above livable areas The Starlink should be mounted on an overhang SETUP ...

Страница 7: ...sky shortly after connecting to power source Starlink Power Supply Router Stowed Initializing Connecting to Satellites Ensure your hands and other objects are out of the way of the Starlink If the Starlink does not connect to the internet within 30 minutes power cycle by unplugging and reconnecting the black cable to the power supply Outdoors Indoors GET ONLINE ...