Connec�ng the First Adapter
It’s a simple plug-and-play process to connect the Adapters. First, connect one Adapter to the
TV or set-top box, the broadband modem or router, and the Internet signal is established over the
coaxial cable. Then, addi�onal Adapters can be installed throughout the home or office at any
loca�on Ethernet or Internet access is needed, and an available coaxial port is available.
The first Adapter connected to the TV or set-top box, the broadband modem or router takes the
Internet signal from the modem/router and delivers it to the coaxial network, while keeping the
TV or set-top box connected.
To connect the first Adapter:
① Locate the coaxial outlet in home desired to place the Adapter. If Web browsing is needed,
locate the coaxial outlet nears the home modem or router provided by Internet Service Provider.
Unplug the end of the coaxial cable connected to the TV set or set-top box from its coaxial wall
outlet. If no TV set or set-top box is plugged into this coaxial outlet, skip to step 3.
② Connect the end of the coaxial cable removed in step 1 into the coaxial port labeled
CATV
(MN2525) or
TV
(MN2550)
on the side of the Adapter.
③ Connect one end of another coaxial cable into the coaxial port labeled
COM
(MN2525)
or
MoCA
(
MN2550)
on the side of the Adapter.
④ Connect the other end of the coaxial cable installed in step 3 to the wall outlet le� unconnected
in step 1.
⑤ Connect one end of an Ethernet cable into the
ETHERNET
(MN2525) or
LAN1
(MN2550) port on
the side of the Adapter.
⑥ Connect the other end of the Ethernet cable into the Ethernet port of home modem or router if
Web browsing is needed. Or connect the other end of the Ethernet cable into the Ethernet port
of the device to connect to Internet.
⑦ Plug in the provided power adapter into the power port on the side of the Adapter. Plug the
other end of the power adapter into an electrical outlet or power source.
MN2525 / MN2550 MoCA 2.5 Adapter
4
MN2525
MN2550
