Starline i96 CAN, Краткое руководство пользователя

Страница: 19 / 20

Short user’s manual
19
Change of owner authorization
code
The owner authorization code is used for authorization by means of the
standard car buttons.
Do as follows to change the owner authorization code:
1.
Set the immobilizer to the «Security off» mode.
2. Switch on the ignition.
3. Press the service button 5 times.
4. Switch ignition off and on.
5. 5 sound signals will follow, confirming entry in the «Owner
authorization code change» mode.
6. Enter the owner authorization code using the standard buttons
with pressing interval not more than 3 seconds. Hold the button
until a confirming sound signal is heard.
The owner authorization code consists of a code sequence,
containing from 3 to 10 pressings of the standard buttons. The
list of the standard buttons supported by the car can be
requested from the setting specialist.
7. In 3 seconds after the end of owner code entry, 2 short signals of
the sound alarm will follow.
8. Enter the owner authorization code again.
9. If the code matches, 2 short sound signals will follow. Otherwise, a
long sound signal will be heard, repeat items 6...8.
10. Switch off ignition to exit the «Owner authorization code change»
mode.
Write down the owner authorization code not to forget it.