TINNITUS OUTPUT RANGE AND STEP SIZE
1.
Select
Tinnitus Output Range and Step Size
, if tinnitus stimulus is
enabled. Refer to the
Tinnitus QuickTIP
for additional information.
2.
Select
pins
to adjust stimulus level for Tinnitus Output Range.
3.
Select
Step Size
of 2dB or 4dB.
NOTE:
Inspire software will not allow for adjustments to Tinnitus
Output Range and Step Size if tinnitus control is not enabled in
User Control Settings.
© 2017 Starkey. All Rights Reserved. 4/17 MISC4727-00-EE-ST
Device Guide
Reset Levels on Memory Change
Tinnitus Range and Step Size
ADDITIONAL CONFIGURATION OPTIONS
1.
Select
VC Self Learning
, then select
Automatic
to enable Self
Learning, if desired.
NOTE:
Self Learning will only operate if a volume control
is enabled. It cannot be enabled at the same time as Auto
Experience Manager. Self Learning defaults OFF.
2.
Reset Levels on Memory Change
will default on, resetting
Volume, Tinnitus, and Balance (if applicable) on the hearing
devices to their preset levels when a memory change occurs. De-
select to disable this feature, if desired.
DEVICE GUIDE
1.
Select
in User Control Settings to print the Device Guide.
This generates a report with user control information specific to
the connected devices.
Self Learning
: Will learn a patient's
volume control preferences and will
automatically make no greater than 2dB
changes at a time based on a patient's
adjustments over a 12 hour learning
period.
