Starkey Push Button Micro RIC 312, Руководство по эксплуатации

Страница: 12 / 26

Multiflex Tinnitus Technology | 23 22 | CROS/BiCROS Technology
Introduction
A Contralateral Routing of Signals (CROS) hearing
system is a type of hearing aid that is used to treat
unilateral hearing loss� It takes sound from the ear with
poorer hearing and transmits it to the ear with better
hearing� CROS only picks up sound from the unaidable
ear, while BiCROS picks up sound from both ears�
Balance Control
Your hearing system uses the button to adjust the
balance between the hearing aid and the transmitter�
This control adjusts the level of sound coming from
the transmitter� Press and release the button until
the desired level is reached� Each press and release
changes the balance level one increment�
NOTE:
Balance Control is only applicable for BiCROS
memories�
CROS Streaming
Your hearing system is equipped with a CROS
transmitter� When you enter a memory with either
CROS or BiCROS streaming enabled, audio from
the transmitter is streamed to your hearing aid�
When CROS streaming begins you may hear an
alert tone� If for any reason the CROS stream is
unexpectedly interrupted you may also hear an
alert tone� Please ask your hearing professional
about your particular settings�
Introduction
Multiflex Tinnitus Technology can be used as a part
of a tinnitus treatment program� Multiflex Tinnitus
Technology plays a tinnitus stimulus through the
hearing aid� The tinnitus stimulus is programmed
according to your hearing loss, and your hearing
professional can adjust the settings of the tinnitus
stimulus to meet your needs�
Sprinkler Stimulus Control
If your user control is configured as a sprinkler stimulus
control, each time you activate the user control, the
stimulus level in your hearing aid changes�
Sprinkler stimulus control is configured by default to
automatically decrease in level before it increases�
To make the stimulus level louder, activate the user
control� Repeat this motion until you are at the
minimum setting� The next time you activate the user
control, the level will increase one step� Continue to
activate the user control until you reach the desired
loudness�
NOTE:
If 10 minutes or more have passed since the
last stimulus level change, the level will automatically
decrease before it increases�