7
6
TIP
– To extend its battery life, place the TruLink
Remote into a Locked state when not in use.
Ear Selection Switch
The Ear Selection Switch controls whether
adjustments are made to a single hearing
instrument or both hearing instruments.
Binaural Hearing Instruments:
To adjust
both hearing instruments at the same time,
the Ear Selection Switch should be positioned
in the center.
Monaural Hearing Instrument:
The Ear
Selection Switch is ignored for monaural hearing
instruments, as TruLink Remote always sends the
appropriate left-side or right-side command.
LED
The blue LED blinks when a button press
command is sent to the left hearing instrument.
Similarly, the red LED blinks for the right
hearing instrument.
Volume Up/Down
Each time you press a Volume button, the
overall level of all sounds coming through your
hearing instrument changes in the selected
direction (either up or down).
Home
To reset your hearing instruments to memory
one and the default volume level, press the
Home button.
Lock/Unlock
To make adjustments to your hearing
instruments, the TruLink Remote should be in
the Unlock state. When not using your TruLink
Remote, you can lock it to prevent inadvertent
hearing instrument changes.
Left
Both
Right
Locked
Unlocked