Starke EcoMaxx ECO-FD 18, Руководство по эксплуатации

Страница: 14 / 48

8
UNLOADING
Tilt the mast forward to either a vertical or forward tilt position then lower the forks to the desired spot for unloading. Back away with the mast in one of the
above conditions, smoothly withdrawing the forks from beneath the load. Raise the forks 15 to 20 cm and proceed to the next operation.
1. If the mast is tilted backward at first when loading, the fork tips will strike the object for loading and the forks cannot be slipped underneath as far as
the front of the carriage.
2. Do not approach the load fast and strike it.
3. When travelling with a load on the forks, keep the mast titled backward and the forks 15 to 20 cm off the ground.
4. Never travel with the mast titled forward with the load raised. The load center of balance can shift and cause the load to fall off.
5. Back down a slope slowly when carrying a load.
STOPPING AND PARKING
To come to a stop, release your foot from the accelerator pedal, reduce speed and apply the brake with the foot pedal.
When parking the vehicle, stop in a place where the vehicle will not be in the way of other vehicles. Set the parking brake and lower the forks onto the floor or
ground.
NOTE: Do not attempt to stop on a slope or incline by working the accelerator pedal with the unit in gear. This will cause the oil temperature to rise in
the torque converter. This is called the stall speed of the engine.