Sivu 18 / 19
9.3.
Adjustment of the safety valves
The safety valve is a safety mechanism, which is set in factory. Any alterations or modifications to the
hydraulic system are on the sole responsibility of the client.
Different types of valves are used with different hydraulic systems (pictures 11 and 12 below). The hydraulic cylinder
safety valve is adjusted by removing the protective cap, opening a locknut with a 13mm wrench and adjusting the safety
valve with a 5mm hex key.
NOTE!
Adjust the safety valve gradually, by turning ¼ at a time and test the functionality.
Picture 11. 5-hose system safety valve
Picture 12. 3-hose system safety valve
