Sivu 11 / 19
7.4.
Wireless controller
Wireless controller is available as an accessory for the road grader, which allows to control all movements of the grader
with one 2-action section valve.
Controller, it’s fastener and power socket are
added to the base machine. Controller is
used to control electric valves added to the grader.
Operating instructions:
-
Attach electricity from the base machine with a 3-pin power socket.
-
Turn the controller on with a green START-button (must be done every time the power supply stops).
-
Operate controllers’ buttons simultaneously with the base machine’s directional valve.
-
When transferring the grader turn off the controller with a red STOP-
button. This way base machine’s
directional valve only operates the rotation of the tire packer.
-
The warning light of the controller lights up 100 hours before the batteries are empty.
-
If there is an error in controller, recode it.
There are 5 actions available for the controller (1+4 electrically controlled actions)
Hydraulic section (picture 4.)
-
Tire packer's rotation
-
1. section: Tilt of the grader
-
2. section: Back lift / adjusting the drag
-
3. section: S
ynchronized lift (shaft’s cylinder and grader’s back lift cylinder move simultaneously
-
4. section: Operating the di
tch wing or the windrow spreader’s extension (is left unused if ditch wing is operated
from the base machine’s own hydraulic section)
-
5. section: Adjusting the windrow blade (additional section)
-
6. section: Adjusting the windrow blade (additional section)
Additional sections require 6-action wireless controller
Picture 4. Hydraulic sections
