5
3. PROGRAMMING OF THE PERSONAL CODE
5. REPLACING THE BATTERIES
B
. Now press 2 to 12 numbers that you wish to use as your personal
combination and within 15 seconds press the " " or " " key. You will hear a
*
#
beep and the green light will be on, and then within 5 seconds, open the door
using the knob.
C
. Before closing the door; check few times your new combination with the
door open.
Enter your personal code and press the " " or " " key. Turn the knob
*
#
clockwise within 5 seconds to open the door.
4. BATTERY REPLACEMENT WARNING
If the batteries are low, the red light (in the middle) will flash after the opening
procedure. In this case, you must replace the 4 batteries, also if you still have
some possible openings.
A
. Press the
placed on the back of the door near
red programming button
the hinge. The yellow light will be on.
Open the door after programming your personal code.
The security box requires 4 x size “AA” (1.5V LR6) batteries that are located at
the back of the door. Remove the keyboard cover, change the 4 batteries and
replace the keyboard cover.
7. INSTALLING OF THE SECURITY BOX
To reduce the risk of theft of the security box, it must be secured to the floor,
wall or in a cabinet. For your convenience, there are holes both in the bottom
and on the back; therefore
，
it can be fixed by the commonly used anchor bolts
supplied. If you will fix in a particular structure, it will be necessary to buy
specific fixings bolts.
CAUTION
:
the security box should be installed in a horizontal position.
Same as First-time door opening.
6. EMERGENCY OPENING USING THE KEY