Stark KH 1600 S, Руководство по эксплуатации и техническому обслуживанию

Страница: 11 / 23

Sivu 11 / 23
7. OPERATING THE COLLECTING SWEEPER
Before using the collecting sweeper, make sure:
-
the sweeper is installed correctly
-
all locking pins are in place
-
hydraulic hoses are installed correctly
-
hoses are intact
-
there are no oil leaks
-
all functions are working properly
-
that you have learnt to operate the collecting sweeper in a closed area before actually starting to use it
7.1. Operating manual
1. Make sure that the attachment and the base machine are compatible in terms of mechanical solutions,
hydraulics and electricity.
2. The collecting sweeper is attached to the coupler on the base machine (e.g. a loader). Attach the sweeper to
the base machine, and make sure the locking cotters and pins are secured.
3. Turn off the base machine and make sure the parking brake is applied.
4. Make sure there is no pressure in the base machine hydraulic system. When connecting, always make sure the
hydraulic connectors are clean and the hoses are intact.
5. Check carefully the movement paths between the coupling mechanism, the base machine and the attachment
for collisions.. Make sure that the hydraulic hoses and connectors have enough space.
6. Check that the brush roll rotates in the direction of the case and the side brushes (if used) rotate towards the
device. If not, switch hose locations in the base machine.
7. Broom roller’s rotational speed can be adjusted by a flow control valve. Usually, appropriate speed is set by
using positions 2-10. If the base machine has a flow control feature, turn the flow control valve to position 10.
8. Adjust driving speed, engine’s revolution speed and rotational speed of the broom roller to fit your working area.
9. Use the adjustment pole to set the brush at the appropriate height from the ground . In the appropriate height,
the brush rings are pressed approx. 20mm against the ground.
10. When possible keep the floatation in the centre so that the sweeper rests on its support wheels, following
slantings and other shapes on the road more closely. Do not lift or press the sweeper against the ground with a
lifting device.
11. Stay alert for any unusual behavior and oil leaks also during driving.