background image

IMPORTANT SAFETY INFORMATION

GENERAL SAFETY WARNINGS

Read all safety warnings and instructions. Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. Save all warnings and instructions 

for future reference. 

SAFETY 

The warnings, precautions, and instructions discussed in this instruction manual cannot cover 

all possible conditions and situations that may occur. It must be understood by the operator 

that common sense and caution are factors which cannot be built into this product, but must be 

supplied by the operator. Read carefully and understand all ASSEMBLY AND OPERATION

INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

precautions may result in serious personal injury.

Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the 

tool while you are tired or under the influence of drugs, alcohol, or medication.

1

Read and understand all instructions.

 Failure to follow all instructions may result in serious injury

or property damage.

Do not allow persons to operate or assemble the product until they have read this manual and

have developed a thorough understanding of how it works.

Do not modify this product in any way. 

Unauthorized modification may impair the function and/or

safety and could affect the life of the product. There are specific applications for which the product

was designed. 

Use the right tool for the job.

 DO NOT attempt to force small equipment to do the work of larger

industrial equipment. There are certain applications for which this equipment was designed. This

product will be safer and do a better job at the capacity for which it was intended. DO NOT use

this equipment for a purpose for which it was not intended.
I

nspect the work area before each use

. Keep work area clean, dry, free of clutter, and well-lit.

Cluttered, wet, or dark work areas can result in injury. 

Never 

operate the machine with the belt guard missing. Exposed drive belt and pulleys create 

potentially dangerous hazards that can cause serious injuries.

Never 

use the trowel around pop-ups in the concrete that are lower than the lowest ring on the ring 

guard.

Keep children and bystanders away from the work area while operating the tool.

 Do not allow

children to handle the product. 

Always 

close fuel valve on engines equipped with one when machine is not being operated.

Always 

operate machine with all safety devices and guards in place and in working order. DO 

NOT modify or defeat safety devices. DO NOT operate machine if any safety devices or guards are 

missing or inoperative.

Содержание 61024












Отзывы: