background image

PLATE COMPACTOR

2

Specifications

INTRODUCTION

Introduction

2

Specifications

2

Symbols

3

Safety

3

General Safety Rules

3

Specific Safety Rules

5

Contents Supplied

6

Assembly

7

Know your Compactor

9

Features & Controls

9

Compactor Operation

10

Maintenance

12

Storage

15

Lifting/Transporting

16

Trouble Shooting

17

Parts Schedule

18

Parts List

19

Your new Vibratory Plate Compactor will 
more than satisfy your expectations. It has 
been manufactured under stringent quality 
standards to meet superior performance 
criteria. You will find it easy and safe to 
operate, and with proper care, it will give you 
many years of dependable service.

Carefully read through this entire 
operator’s manual before using 
your new Plate Compactor. Take 
special care to heed the cautions 
and warnings.

These compactors are not intended 
to be used on cohesive soils such 
clay or hard surfaces like concrete.

The commitment to quality has been designed 
into details: reinforced self-cleaning base 
plate, engine oil drain hose, closed V-belt 
guard, self-adjusting centrifugal clutch and 
folding handle. A range of useful accessories 
enables use in all kinds of applications.

The Plate Compactor applies energy to the 
loose soil or other materials to increase its 
density and load bearing capacity, mainly used 
for small repair and maintenance work. The 
loose soil or particles are moved or rearranged 
in a particular manner close to each other to 

The 

Engine Manufacturer

 is responsible for 

all engine-related issues with regards to 
performance, power rating, specifications, 
warranty and service. Please refer to the 

Engine Manufacturer’s

 owner/operator’s 

manual, packed separately with your unit, for 
more information.

Item No.

61021

Plate Size

540 X 450 mm

Centrifugal Force

20000 N

Exciter Speed

5500 vpm

Compaction Speed

30 cm

Travel Speed

25.5 m/min

Engine

196cc, 4.1 kW

Operation Weight

96 kg

RECYCLING AND DISPOSAL

This marking indicates that this 
product should not be disposed with 
other household wastes. To prevent 
possible harm to the environment 
or human health from uncontrolled 
waste disposal, recycle it responsibly 
to promote the sustainable reuse of 
material resources. To return your 
used device, please use the return 
and collection systems or check with 
your local authority or local stores 
for advice of environmental safe 
recycling.

avoid any trapped air or voids. It increases 
the load bearing capacity, decreases water 
seepage, prevents soil settlement, reduces 
swelling, contraction of the soil and prevents 
frost damage. It is ideal for compaction 
of granular soils, sands, gravel, crushed 
aggregate and mixed soils.

SAFETY WARNINGS

TABLE OF CONTENTS

Содержание 61021






















Отзывы:

Похожие инструкции для 61021