7
!CAUTION
Do not pull the rope all the way and do not
take your hand off the pulled knob but slowly
return it original position
．
3-8
．
After starting up the engine
，
be sure to perform a
warm up the engine
，
be sure to perform a warm
up run for 2 to 3 minutes
．
This should be
performed without fail,particularly during
winter season
．
4
．
Operation
4-1
．
As the engine warms up,gradually move the choke
lever to the OPEN position Fig-8
4-2
．
Move the speed control lever from the LOW to the
HIGH position
．
When the engine speed reaches
approximately 2,300-2,600 PRM,the centrifugal
clutch engages
．
If the engine speed increased very
slowly,it is possible that the clutch can slip
．
Do
not operate the speed control lever slowly
．
Fig-9,10
OIL ALERT SYSTEM
The Oil Alert System is designed to prevent engine
damage caused by an insufficient amount of oil in the
crankcase
．
Before the oil level in the crankcase can fall
below a safe limit the Oil Alert System will
automatically stop the engine(the engine switch will
remain in the ON position)
．
!NOTICE
If the engine stops and will not restart,check
the engine oil level
．
4-3
．
When compacting asphalt,it is advisable to paint
the bottom face Of the vibrating plate with diesel
fuel
．
This will assist in preventing the plate from
sticking to the as halt
．
4-4
．
When shutting off the vibrator,turn the speed
control lever from the HIGH to LOW position
．
Do
not move the speed control lever slowly
．
5
．
Transportation
5-1
．
Be sure to stop the engine while transporting
．
5-2
．
Screw up the fuel tank cap securely and close the
fuel valve to avoid fuel leaking
．
5-3
．
1n transportation by car,fix machine securely not to
move nor to fall down
．
In case Of driving for long distance or at off-road,
tank out fuel from tank
．
