CLEANING AND MAINTENANCE
Before cleaning and maintenance, always switch off the machine and remove the mains plug
from the mains.
Regularly clean the housing with a soft cloth.
Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
Regularly clean the sanding pad to avoid inaccuracies during use.
Replacing the sanding paper (fig. B)
To remove the old sanding paper (5), proceed as described in the section „Mounting and
removing the sanding paper“.
To mount the new sanding paper (5), proceed as described in the section „Mounting and
removing the sanding paper“.
Replacing the sanding pad (fig. D)
In case of wear, the sanding pad must be replaced.
If necessary, remove the sanding paper.
Loosen the screws (6) from the sanding pad (4).
Remove the old sanding pad (4).
Mount the new sanding pad (4).
Tighten the screws (6) to the sanding pad (4).
WARRANTY
Consult the enclosed warranty terms
ENVIRONMENT
The product, the accessories, and the packaging must be sorted for environmentally friendly
recycling.
Only for EU countries.
Do not dispose of power tools into domestic waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic Equipment and its implementation into national
right, power tools that are no longer usable must be collected separately and disposed of in an
environmentally friendly way. The product and the user manual are subject to change.
Specifications can be changed without further notice.
