Powering Up the Cool Edge
There is no power switch on the Cool Edge—simply plug it in using the included power supply and it
will begin running. We recommend letting the cooler run for at least 10 minutes to stabilize the
telescope.
Replacing the Secondary Mirror
Remove the Cool Edge from the telescope. Unthread the retaining ring from the Cool Edge and lift out
the secondary mirror. There is a notch in the secondary holder on the front of the telescope to accept
the set screw in the side of the secondary housing. This retains the initial collimation of your telescope,
so there is no need to recollimate after using the Cool Edge. Thread the retaining ring back onto the
telescope and you are ready to observe!
Starizona
5757 N. Oracle Rd.
Tucson, AZ 85704
520-292-5010
www.starizona.com
