StarForm Swift-G OI-G1480, Руководство пользователя, Страница: 79 / 84

ent temperature, and a different
SensorTemperatureRegulation-
Target should be selected. If the system can not achieve tem-
perature regulation at any SensorTemperatureRegulation-
Target
contact support.
8.2.70 SensorTemperatureRegulationTarget
Name SensorTemperatureRegulationTarget
Category CalibrationControl
Interface IEnumeration
Access Read/Write
Unit
-
Visibility Beginner
Values Temp 10C, Temp 25C, Temp 40C, Temp 55C
Center of operating temperature range used to select regulation
and calibration profile. Note that these temperatures relate to the
temperature of the system housing, after a warm-up period.
The relationship between system housing temperature and ambi-
ent temperature depends on several factors, such as airflow, any
thermal connection between the system and mounting hardware,
and illumination setting and duty cycle. In a typical situation, the
housing temperature will stabilise at around 20 to 25 degrees above
ambient.
•
Temp 10C . Temperature range centered on 10C.
• Temp 25C
. Temperature range centered on 25C.
•
Temp 40C . Temperature range centered on 40C.
• Temp 55C
. Temperature range centered on 55C.
8.2.71 TLParamsLocked
Name
TLParamsLocked
Category Root
Interface IInteger
Access Read/Write
Unit -
Visibility Invisible
Values -
71 of 76