HOW TO USE THE TIMER
•
The maximum time value is 99 hours and 59
minutes.
•
Press the
"
MODE
"
button.
•
To access the countdown mode, press the
"
MIN
"
button to increase the minutes and “SEC” to
increase the seconds. Press the “SP/ST” button to
start the countdown. Once arrived at “00.00” the
alarm will start. Press the
"
SP/ST
"
button again to
turn off the alarm.
•
To access the count up mode, press the
"
SP/ST
"
button. Press this button again to stop the timer.
•
To reset the counter to “0”, press the
"
- MIN
"
et
"
- SEC
"
buttons at the same time.
CLEANING
•
The thermometer cannot go in the water or in the
dishwasher. This could cause irreversible damage
to the product. If necessary, simply wipe the
thermometer with a damp cloth.
•
Thoroughly clean the probe and wire before
and after each use with a damp cloth and warm
soapy water. Take care not to immerse the wire
connector in the water.
•
The stainless steel probe and the wire may
become very hot after use. To prevent burns,
wait until they have cooled completely before
cleaning.
