StarEv AP48-04, Руководство пользователя и руководство по обслуживанию

Страница: 23 / 28

22
Troubleshooting
There is no settled mode to diagnose and eliminate malfunctions. During maintaining and checking,
we suggest you first listen, then look and feel. Below is the diagnoses and maintenance of some
common malfunctions.
1|
The vehicle doesn’t move
Malfunction Possible reason Troubleshooting
No display on instrument
panel when vehicle is on,
and vehicle doesn’t move
Connector(s) in circuit is loose or open Tighten or connect
Fuse of controller or main circuit is open Change fuse
Battery cable(s) is loose or disconnected Tighten or change
Power key is broken Change
voltmeter is broken Change
Battery terminals connect improperly Adjust
Display on instrument
panel when vehicle is on,
but vehicle doesn’t move
Improper operating procedure Operate properly
Controller failure Check or change
Solenoid failure Check, repair, change
Accelerator failure Repair or change
Motor failure Repair or change
Parking brake doesn’t loosen Loosen parking brake
Over-heat protection Check, eliminate
2|
Locking control when vehicle starts running, speed cannot be adjusted
Malfunction Possible reason Troubleshooting
Vehicle runs at full speed
when it starts
Terminals of solenoid stick together Check or repair
Controller failure Change
Potentiometer failure Repair or change