Stardom iTANK i310-SB2, Руководство пользователя

Страница: 6 / 48

6
iTANK i310 Series User Manual
English
Deutsch
Français
Español
中文
日本語
한국어
i310-WBS2 / i310-WBS3 Front and Rear Views
FW800
FW800
FW400
E-SA
TA
USB2.0
OFF / O
N
+5
V
+12V GN
D
DC IN
FW800
FW800
FW400
E-SA
TA
USB3.0
OFF / O
N
+5
V
+12V GN
D
DC IN
Note :
Only one interface connection on the iTANK may be used at once per one computer system.
The secondary FireWire 800 (1394b) connection on the iTANK i310-WBS2 / i310-WBS3 is provided to
connect and extend to another FireWire 800 (1394b) device.
2. Environmental Requirements
Operating Temperature : 0 ~ 40
℃
(32 ~ 104 F)
Storage Temperature : -10 ~ 70
℃
(14 ~ 158 F)
Line Voltage: 100 ~ 240V AC
3. Hard Drive Requirements and Precautions
1. Only one interface connection may be used at once per computer system.
2. The actual storage capacity of iTANK series recognized by the system may differ from
the capacity stated on the hard drive once the drive has been formatted.
3. Please make sure that the hard drive you will be installing into the enclosure unit is free
from bad blocks or defects to avoid system crashes or data loss.
4. Whenever removing the enclosed drive from the enclosure body or unplugging the
enclosure unit from the computer system, always remember to safely remove the
designated drive from your operating system first.
5. When connected to the computer system, it’s prohibited to remove, insert or swap the
hard drive while data transfer is being performed.
6. It is highly recommended for users to back up important data contained within the drive
of the iTANK unit on a regular basis or whenever the user feels necessary to a remote or
a separate storage device. Stardom will not be responsible for any lost of data caused
during the use of the iTANK unit or the recovery of the data lost.