Starck Sefam S.Box Duo S, Руководство для пациента

Страница: 31 / 40

S.Box Duo S and S.Box Duo ST In case of problems  31
In case of problems
Helpful tips
Problem Possible cause Suggestion
Your nose is cold The room temperature
is too low.
The air delivered is too
cold. Increase the room temperature.
Ask your Home Care Provider to provide you with
a S.Box heated tube with ATC.
Runny nose. Reaction to air flow
and pressure levels. Contact the medical-technical support or your
doctor.
Your nose or throat is
dry or irritated. The air is too dry
Lack of water in the
chamber (if included). Use the humidifier when your device is equipped
with one. Increase the humidification level (see
section "How to set the device" page 16).
Check the water level in the chamber. If
necessary, complete it (see section "Filling the
humidifier chamber (if installed)" page 11).
Pain in nose, sinus or
ears. Sinus infection or
nasal congestion. Contact your doctor immediately.
Redness of your skin
in contact with the
mask. The headgear is too
tight or its size is
wrong.
Allergic reaction to
mask components Adjust the headgear. Contact your doctor or Home
Care Provider to try different sizes.
Stop using the mask. Contact your doctor or the
Home Care Provider.
Dryness or irritated
eyes. Air leak around the
mask. Reposition the mask. Ask your doctor or Home
Care Provider to try different sizes of masks.
The air delivered by
the device is too hot. Air inlet filters are dirty.
The air inlet is
clogged.
The room temperature
is too high. Clean or replace the air inlet filters (see chapter
"Cleaning and Maintenance" page 29).
Keep all linen and clothing away from the device.
Lower the room thermostat. Make sure the device
is away from any source of heat. Unplug the S.Box
heated tube with ATC (if installed).
Recurrence of
symptoms of sleep
apnea syndrome. The device is not set
to the correct pressure
or is not operating
properly.
Your physical
condition or pressure
needs may have
changed.
Ask the Home Care Provider to check how it
operates.
Contact your doctor.
The device does not
deliver the correct
pressures (on
display). The ramp is enabled.
Check that the ramp indicator is displayed. If
necessary, disable the ramp feature (see section
"How to set the device" page 16).